HomeJuteAgroMarketsGuidesAboutContactRequest a Quote
Guide · Jute bags

B-Twill vs Binola vs D.W. Jute Bags: A Buyer's Guide

Pick the wrong weave and you either overpay or watch sacks fail under load. Here is exactly how B-Twill, Binola and D.W. jute bags differ, and which one suits coffee, cocoa, grains or sugar.

B-Twill jute bags

B-Twill is a tight twill-weave sack, typically 2.25 lbs at 44"×26.5" with a 6×8 porter & shots count. It's the heavy-duty choice for loads up to ~100 kg, coffee, cocoa, sugar and grains.

Binola jute bags

Binola jute bags are slightly lighter (around 2.0 lbs, 6×7) and suited to ~80 to 90 kg loads. They balance strength and cost for oilseeds, cottonseed and many food commodities.

D.W. (Double Warp) bags

D.W. bags use a denser warp for extra strength at lighter weights, often around 88×52 cm. Useful where buyers want durability without maximum weight.

Which should you choose?

Match the weave to your commodity weight and handling. For aroma-sensitive goods (coffee, cocoa) specify VOT food-grade treatment regardless of weave. We can recommend the right sack for your fill and destination.

Quick answers

FAQ

Is B-Twill stronger than Binola?

Yes, B-Twill is heavier and carries more weight; Binola is lighter and more economical for ~80 kg loads.

Are all three available food-grade?

Yes, all can be supplied VOT (vegetable-oil treated), hydrocarbon-free and odourless.

SIDE-BY-SIDE COMPARISON

B-Twill vs Binola vs Double-Warp: Full Specification Table

Buyers sourcing jute sacking in volume frequently shortlist three weave constructions before placing a trial order. The table below consolidates the most commercially relevant dimensions so procurement teams can compare at a glance without chasing multiple datasheets.

Jute Sack Weave Comparison, B-Twill vs Binola vs Double-Warp (D.W.)
Specification B-Twill Binola Double-Warp (D.W.)
Weave pattern 2/2 twill (diagonal rib) Plain / coarse open weave Plain weave, doubled warp yarn
P&S (Porter & Shot) 6 × 8 6 × 7 Varies by sub-type (7 × 7 typical)
Standard bag weight ~1,020 g (2.25 lb) ~900 g (2.0 lb) ~1,100–1,200 g (2.4–2.65 lb)
Typical dimensions (100 kg) 112 cm × 68 cm (44" × 26.5") 112 cm × 67 cm (44" × 26.5") Sub-type dependent (DW Flour, DW Salt, etc.)
Nominal capacity 80–100 kg 70–90 kg 50–100 kg (sub-type specific)
Breathability Moderate, tight twill limits airflow High, open weave allows ventilation Low, double warp reduces porosity
Tear & burst resistance High Moderate–High Very High (reinforced construction)
Best commodities Grains, pulses, wheat, coffee, cocoa, cashew Oilseeds, cottonseed, animal feed, groundnuts Salt, flour, sugar, fertiliser, chemicals
VOT treatment available Yes (food-grade, odour-free) Yes Typically untreated
Common export markets EU, UK, GCC, USA GCC, South Asia domestic Industrial bulk, regional

Choosing the Right Bag for Your Commodity

The weave construction drives real-world performance differences that matter when contents travel thousands of kilometres by sea.

  • B-Twill for high-value food grains: The 2/2 diagonal twill locks warp and weft tightly, reducing leakage of fine particles such as lentils, milled rice, or green coffee. It is the default specification in government food-grain procurement programmes across South Asia and is accepted by most European grain importers.
  • Binola for loosely packed, breathable loads: The more open plain weave allows moisture and gases to escape, making Binola jute bags the preferred choice for oilseeds and cottonseed where heat build-up and condensation must be avoided in transit. Its lighter bag weight also reduces tare on cost-sensitive bulk shipments.
  • Double-Warp for abrasion and puncture resistance: Doubling the warp yarn dramatically increases structural integrity, making D.W. bags suitable for heavy, angular, or chemically active contents like salt, fertiliser, and industrial minerals. Sub-types (DW Flour, DW Salt, DW Nitrate) are each tuned for their commodity.
  • P&S notation explained: "Porter & Shot" (P&S) is a Bangladesh industry convention for counting the number of warp picks and weft shots per 2.54 cm (1 inch). A B-Twill at 6 × 8 has 6 warp ends and 8 weft picks per inch, a denser weft than Binola's 6 × 7, which accounts for the heavier bag weight and tighter fabric structure.
BUYER FAQ

People Also Ask, Jute Bag Weave Types

What does "B-Twill" mean and why is it called that?

B-Twill refers to a specific grade of jute twill fabric where yarns are interlaced in a 2/2 diagonal pattern. In Bangladesh's jute industry, letter prefixes (A, B, L) historically denoted yarn quality grades, "B" indicating the standard commercial grade most widely used for agricultural sacking. The twill weave gives the fabric its characteristic diagonal rib and adds tensile strength compared to a plain weave of the same yarn count.

Is B-Twill or Binola better for coffee export?

B-Twill is the industry standard for green coffee export, particularly for the global 60 kg bag format. Its tighter weave minimises fine-particle loss, and VOT (Vegetable Oil Treated) B-Twill is fully odour-free, ensuring no jute smell taints the green beans. Binola's more open structure, while excellent for airflow, allows too much particle leakage for fine coffee grades.

Can Double-Warp jute bags be used for food products?

Yes, when specified correctly. DW Flour Bags are a well-established sub-type used for packed flour in domestic and export trade. However, D.W. construction is generally heavier and less breathable, so it is not preferred for commodities requiring ventilation. Food-grade D.W. bags must be made from uncontaminated jute yarn and stored separately from chemical or fertiliser-grade bags.

What is the minimum order quantity for B-Twill jute sacks from Bangladesh?

MOQs vary by exporter, but most Bangladesh manufacturers work in full bale multiples. A standard hydraulic-pressed bale contains 250–500 bags depending on bag size. Commercial trial orders typically start at 1–5 bales (250–2,500 bags); full container orders (20 ft FCL) range from 15,000 to 25,000 bags of the 100 kg B-Twill size depending on compression ratio. Requesting a sample bale before committing to an FCL is standard practice.

How does P&S relate to GSM or bag weight?

P&S (Porter & Shot) is a Bangladesh-specific measurement of yarn picks per inch. GSM (grams per square metre) is the European standard. The two are related but not directly interchangeable without knowing the yarn count (Lea count). As a practical guide: B-Twill at 6 × 8 P&S typically yields a fabric around 480–520 GSM and a finished 100 kg bag weighing roughly 1,000–1,020 g. When specifying bags to European buyers, always provide both P&S and GSM alongside bag weight in grams.

Are B-Twill jute bags compliant with EU packaging regulations?

Jute sacks are classified as natural textile packaging and generally benefit from the EU PPWR 2025/40 exemptions applicable to textile-based materials under Article 48(1). They are biodegradable, compostable, and do not contain PFAS or other regulated substances of concern. Buyers importing food grain in B-Twill bags into the EU should confirm food-contact compliance with their national competent authority, particularly that VOT treatment used meets EU food-contact material standards.

Related Products & Guides

Explore Zayin Trade International's range of export-ready jute sacking options and learn more about associated topics: B-Twill jute sacking bags, our full hessian cloth and bags range, and the guide on hessian vs burlap vs gunny regional terminology. Ready to specify your order? Request a quote with your commodity, capacity, and destination port.

07 Request a quote

Send your spec. Get a real quote within 2 hours.

  • Specs, MOQ, pricing and lead times. Clear numbers, no runaround.
  • Talk to a specialist for your division & market.
  • Samples and certificate documents on request.
Zayin Group
House 29 (D2), Road 09, Block-G, Banani, Dhaka-1213, Bangladesh
Phone: +880 2 5504 2274 · +880 1711 979951
Email: sales@zayingroup.com

Get a Quote

Short on purpose. Branches by division.

Prefer chat? Message us on WhatsApp →